Hyperlipoproteinemia(a) and Severe Coronary Artery Lesion Types.

Diffuse atherosclerosis and calcification of the coronary arteries (CA) create serious difficulties for coronary artery bypass grafting (CABG). The aim of this study was to compare demographic indicators, lipids, and clinical results one year after CABG in patients with different phenotypes of coronary artery (CA) disease. In total, 390 patients hospitalized for elective CABG were included in a single-center prospective study. Demographic data, lipids (total, low-density lipoprotein and high-density lipoprotein cholesterol, and triglycerides), and lipoprotein(a) (Lp(a)) concentrations were analyzed for all patients. Major adverse cardiovascular events (MACE) included myocardial infarction, stroke, percutaneous coronary intervention, and death from cardiac causes within one year after surgery. No significant outcome differences were found between the groups with diffuse vs. segmental lesions, nor the groups with and without calcinosis for all studied parameters except for Lp(a). Median Lp(a) concentrations were higher in the group of patients with diffuse compared to segmental lesions (28 vs. 16 mg/dL, p = 0.023) and in the group with calcinosis compared to the group without it (35 vs. 19 mg/dL, p = 0.046). Lp(a) ≥ 30 mg/dL was associated with the presence of diffuse lesions (OR = 2.18 (95% CI 1.34-3.54), p = 0.002), calcinosis (2.15 (1.15-4.02), p = 0.02), and its combination (4.30 (1.81-10.19), p = 0.0009), irrespective of other risk factors. The risk of MACE within one year after CABG was higher for patients with combined diffuse and calcified lesions vs. patients with a segmental lesion without calcinosis (relative risk = 2.38 (1.13-5.01), p = 0.02). Conclusion: Diffuse atherosclerosis and coronary calcinosis are associated with elevated Lp(a) levels, independent of other risk factors. The risk of MACE in the first year after surgery is significantly higher in patients with diffuse atherosclerosis and coronary calcinosis, which should be considered when prescribing postoperative treatment for such patients.

Fano-type Effect in Hydrogen-Terminated Pure Nanodiamond.

Two novel properties, unique for semiconductors, a negative electron affinity and a high p-type surface electrical conductivity, were discovered in diamond at the end of the last century. Both properties appear when the diamond surface is hydrogenated. A natural question arises: is the influence of the surface hydrogen on diamond limited only to the electrical properties? Here, for the first time to our knowledge, we observe a transparency peak at 1328 cm-1 in the infrared absorption of hydrogen-terminated pure (undoped) nanodiamonds. This new optical property is ascribed to Fano-type destructive interference between zone-center optical phonons and free carriers (holes) appearing in the near-surface layer of hydrogenated nanodiamond. This work opens the way to explore the physics of electron-phonon coupling in undoped semiconductors and promises the application of H-terminated nanodiamonds as a new optical material with induced transparency in the infrared optical range.

Size-Dependent Thermal Stability and Optical Properties of Ultra-Small Nanodiamonds Synthesized under High Pressure.

Diamond properties down to the quantum-size region are still poorly understood. High-pressure high-temperature (HPHT) synthesis from chloroadamantane molecules allows precise control of nanodiamond size. Thermal stability and optical properties of nanodiamonds with sizes spanning range from <1 to 8 nm are investigated. It is shown that the existing hypothesis about enhanced thermal stability of nanodiamonds smaller than 2 nm is incorrect. The most striking feature in IR absorption of these samples is the appearance of an enhanced transmission band near the diamond Raman mode (1332 cm-1). Following the previously proposed explanation, we attribute this phenomenon to the Fano effect caused by resonance of the diamond Raman mode with continuum of conductive surface states. We assume that these surface states may be formed by reconstruction of broken bonds on the nanodiamond surfaces. This effect is also responsible for the observed asymmetry of Raman scattering peak. The mechanism of nanodiamond formation in HPHT synthesis is proposed, explaining peculiarities of their structure and properties.

Behavior of implanted Xe, Kr and Ar in nanodiamonds and thin graphene stacks: experiment and modeling.

Implantation and subsequent behaviour of heavy noble gases (Ar, Kr, and Xe) in few-layer graphene sheets and in nanodiamonds are studied both using computational methods and experimentally using X-ray absorption spectroscopy. X-ray absorption spectroscopy provides substantial support for Xe-vacancy (Xe-V) defects as main sites for Xe in nanodiamonds. It is shown that noble gases in thin graphene stacks distort the layers, forming bulges. The energy of an ion placed in between flat graphene sheets is notably lower than that in domains with high curvature. However, if the ion is trapped in the curved domain, considerable additional energy is required to displace it. This phenomenon is likely responsible for strong binding of noble gases implanted into disordered carbonaceous phase in meteorites (the Q-component).

Thermodynamic Behaviors of Adsorbed Methane Storage Systems Based on Nanoporous Carbon Adsorbents Prepared from Coconut Shells.

The present work focused on the experimental study of the performance of a scaled system of adsorbed natural gas (ANG) storage and transportation based on carbon adsorbents. For this purpose, three different samples of activated carbons (AC) were prepared by varying the size of coconut shell char granules and steam activation conditions. The parameters of their porous structure, morphology, and chemical composition were determined from the nitrogen adsorption at 77 K, X-ray diffraction (XRD), small-angle X-ray scattering (SAXS), and scanning electron microscopy (SEM) measurements. The methane adsorption data measured within the temperature range from 178 to 360 K and at pressures up to 25 MPa enabled us to identify the most efficient adsorbent among the studied materials: AC-90S. The differential heats of methane adsorption on AC-90S were determined in order to simulate the gas charge/discharge processes in the ANG system using a mathematical model with consideration for thermal effects. The results of simulating the charge/discharge processes under two different conditions of heat exchange are consistent with the experimentally determined temperature distribution over a scaled ANG storage tank filled with the compacted AC-90S adsorbent and equipped with temperature sensors and heat-exchanger devices. The amounts of methane delivered from the ANG storage system employing AC-90S as an adsorbent differ from the model predictions by 4-6%. Both the experiments and mathematical modeling showed that the thermal regulation of the ANG storage tank ensured the higher rates of charge/discharge processes compared to the thermal insulation.

Inelastic neutron scattering: a novel approach towards determination of equilibrium isotopic fractionation factors. Size effects on heat capacity and beta-factor of diamond.

A new experimental method for the determination of equilibrium isotopic properties of substances based on inelastic neutron scattering (INS) is proposed. We present a mathematical formalism, which allows the calculation of the beta-factor of single-element solids based on INS-derived Phonon Density of States (PDOS). PDOS data for nanodiamonds of widely different sizes and of macroscopic diamond were determined from inelastic neutron scattering experiments. This allowed the determination of heat capacities and, for the first time, ß-factors of the diamond nanoparticles. We demonstrate a considerable size-dependent increase of the heat capacities and decrease of the beta-factors for nanodiamonds relative to bulk diamond. Contributions of surface impurities/phases and phonon confinement to the size effects are evaluated. Applications in the formation of diamond nanoparticles in nature are briefly discussed.

Towards the surface hydroxyl species in CeO2 nanoparticles.

Understanding the complex chemistry of functional nanomaterials is of fundamental importance. Controlled synthesis and characterization at the atomic level is essential to gain deeper insight into the unique chemical reactivity exhibited by many nanomaterials. Cerium oxide nanoparticles have many industrial and commercial applications, resulting from very strong catalytic, pro- and anti-oxidant activity. However, the identity of the active species and the chemical mechanisms imparted by nanoceria remain elusive, impeding the further development of new applications. Here, we explore the behavior of cerium oxide nanoparticles of different sizes at different temperatures and trace the electronic structure changes by state-of-the-art soft and hard X-ray experiments combined with computational methods. We confirm the absence of the Ce(iii) oxidation state at the surface of CeO2 nanoparticles, even for particles as small as 2 nm. Synchrotron X-ray absorption experiments at Ce L3 and M5 edges, combined with X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM) and small angle X-ray scattering (SAXS) and theoretical calculations demonstrate that in addition to the nanoceria charge stability, the formation of hydroxyl groups at the surface profoundly affects the chemical performance of these nanomaterials.

Supramolecular Organogels Based on N-Benzyl, N'-Acylbispidinols.

The acylation of unsymmetrical N-benzylbispidinols in aromatic solvents without an external base led to the formation of supramolecular gels, which possess different thicknesses and degrees of stability depending on the substituents in para-positions of the benzylic group as well as on the nature of the acylating agent and of the solvent used. Structural features of the native gels as well as of their dried forms were studied by complementary techniques including Fourier-transform infrared (FTIR) and attenuated total reflection (ATR) spectroscopy, atomic force microscopy (AFM), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and small-angle X-ray scattering and diffraction (SAXS). Structures of the key crystalline compounds were established by X-ray diffraction. An analysis of the obtained data allowed speculation on the crucial structural and condition factors that governed the gel formation. The most important factors were as follows: (i) absence of base, either external or internal; (ii) presence of HCl; (iii) presence of carbonyl and hydroxyl groups to allow hydrogen bonding; and (iv) presence of two (hetero)aromatic rings at both sides of the molecule. The hydrogen bonding involving amide carbonyl, hydroxyl at position 9, and, very probably, ammonium N-H⁺ and Cl- anion appears to be responsible for the formation of infinite molecular chains required for the first step of gel formation. Subsequent lateral cooperation of molecular chains into fibers occurred, presumably, due to the aromatic π-π-stacking interactions. Supercritical carbon dioxide drying of the organogels gave rise to aerogels with morphologies different from that of air-dried samples.

Redox-mediated formation of plutonium oxide nanoparticles.

Precipitates formed by the neutralisation of Pu(iii), Pu(iv), Pu(v), and Pu(vi) solutions were characterised by HRTEM, SAXS, and XRD in the suspensions. PuO2 nanoparticles uniform in size (typical diameter around 2.5 nm) and phase composition were observed in all cases under equilibrium conditions. For Pu(vi), the precipitation reactions proceed via an intermediate product.

Understanding Self-Assembly of Porphyrin-Based SURMOFs: How Layered Minerals Can Be Useful.

Porphyrin-based metal-organic frameworks on surfaces are a new class of planar materials with promising features for applications in chemical sensing, catalysis, and organic optoelectronics at nanoscale. Herein, we studied systematically a series of the SURMOFs assembled from variously meso-carboxyphenyl/pyridyl-substituted porphyrins and zinc acetate on template monolayers of graphene oxide via layer-by-layer deposition. This microscopically flat template can initiate the growth of macroscopically uniform SURMOF films exhibiting well-resolved X-ray diffraction. By applying the D'yakonov method, which has been previously used for the extraction of self-convolution of electron density in clay minerals, to the analysis of the experimental diffraction patterns of the SURMOFs, we determined the relation between the structure of porphyrin linkers and the geometry of packing motives in the films. We showed that the packing of the SURMOFs differs significantly from that of bulk powders of similar composition because of steric limitations imposed on the assembly in 2D space. The results of microscopic examination of the SURMOFs suggest that the type of metal-to-linker chemical bonding dictates the morphology of the films. Our method provides an enlightening picture of the interplay between supramolecular ordering and surface-directed assembly in porphyrin-based SURMOFs and is useful for rationalizing the fabrication of various classes of layered metal-organic frameworks on solids.

Ion implantation in nanodiamonds: size effect and energy dependence.

Nanoparticles are ubiquitous in nature and are increasingly important for technology. They are subject to bombardment by ionizing radiation in a diverse range of environments. In particular, nanodiamonds represent a variety of nanoparticles of significant fundamental and applied interest. Here we present a combined experimental and computational study of the behaviour of nanodiamonds under irradiation by xenon ions. Unexpectedly, we observed a pronounced size effect on the radiation resistance of the nanodiamonds: particles larger than 8 nm behave similarly to macroscopic diamond (i.e. characterized by high radiation resistance) whereas smaller particles can be completely destroyed by a single impact from an ion in a defined energy range. This latter observation is explained by extreme heating of the nanodiamonds by the penetrating ion. The obtained results are not limited to nanodiamonds, making them of interest for several fields, putting constraints on processes for the controlled modification of nanodiamonds, on the survival of dust in astrophysical environments, and on the behaviour of actinides released from nuclear waste into the environment.

Molecular-sized fluorescent nanodiamonds.

Doping of carbon nanoparticles with impurity atoms is central to their application. However, doping has proven elusive for very small carbon nanoparticles because of their limited availability and a lack of fundamental understanding of impurity stability in such nanostructures. Here, we show that isolated diamond nanoparticles as small as 1.6 nm, comprising only ∼400 carbon atoms, are capable of housing stable photoluminescent colour centres, namely the silicon vacancy (SiV). Surprisingly, fluorescence from SiVs is stable over time, and few or only single colour centres are found per nanocrystal. We also observe size-dependent SiV emission supported by quantum-chemical simulation of SiV energy levels in small nanodiamonds. Our work opens the way to investigating the physics and chemistry of molecular-sized cubic carbon clusters and promises the application of ultrasmall non-perturbative fluorescent nanoparticles as markers in microscopy and sensing.

Two polymorphs of 2-ethyl-3-hydroxy-6-methylpyridinium hydrogen N-acetyl-L-glutamate from powder diffraction data.

The title salt, C8H12NO(+)·C7H10NO5(-), crystallizes in two polymorphic modifications, viz. monoclinic (M) and orthorhombic (O). The crystal structures of both polymorphic modifications have been established from laboratory powder diffraction data. The crystal packing motifs in the two polymorphs are different, but the conformations of the anions are generally similar. In M, the anions are linked by pairs of hydrogen bonds of the N-H···O and O-H···O types into chains along the b-axis direction, and neighbouring molecules within the chain are related by the 21 screw axis. The cations link these chains via O-H···O and N-H···O hydrogen bonds into layers parallel to (001). In O, the anions are linked by O-H···O hydrogen bonds into helices along [001], and neighbouring molecules within the helix are related by the 21 screw axis. The neighbouring helical turns are linked by N-H···O hydrogen bonds. The cations link the helices via O-H···O and N-H···O hydrogen bonds, thus forming a three-dimensional network.

Nitrogen and luminescent nitrogen-vacancy defects in detonation nanodiamond.

An efficient method to investigate the microstructure and spatial distribution of nitrogen and nitrogen-vacancy (N-V) defects in detonation nanodiamond (DND) with primary particle sizes ranging from approximately 3 to 50 nm is presented. Detailed analysis reveals atomic nitrogen concentrations as high as 3 at% in 50% of diamond primary particles with sizes smaller than 6 nm. A non-uniform distribution of nitrogen within larger primary DND particles is also presented, indicating a preference for location within the defective central part or at twin boundaries. A photoluminescence (PL) spectrum with well-pronounced zero-phonon lines related to the N-V centers is demonstrated for the first time for electron-irradiated and annealed DND particles at continuous laser excitation. Combined Raman and PL analysis of DND crystallites dispersed on a Si substrate leads to the conclusion that the observed N-V luminescence originates from primary particles with sizes exceeding 30 nm. These findings demonstrate that by manipulation of the size/nitrogen content in DND there are prospects for mass production of nanodiamond photoemitters based on bright and stable luminescence from nitrogen-related defects.